Page 4 - autometer-wideband-using-lc1
P. 4

If you need to re-configure the output, Set analog output 1 as follows:
            a.  Select the “air fuel ratio” button
            b. 1.050V= 11.00
            c. 0.000V= 19.40
            d.  Select “advanced” button
            e.  Select the “Instant” sample rate.
            f.  Enter 0.15V at warm up.
            g.  Enter 1.20V at output error.
            h. Press “OK”
            i.  Press program

                                                       4
   1   2   3   4