Page 1 - innovate-lm1
P. 1

LM-1 Digital Air/Fuel Ratio (Lambda) Meter
                                                         Manual










                                                        Warning!

                   The Oxygen Sensor used in this device gets very hot in operation.
                   Do not touch the hot sensor.   Do not let a hot sensor touch a
                   combustible surface.  Do not use the sensor with or near flammable
                   liquids or gases.  Failure to heed these warnings may result in severe
                   burns, explosions or fires.

                   When installed in the exhaust, the oxygen sensor MUST be
                   connected and operating with the LM-1 whenever the car is running.
                   An un-powered oxygen sensor will be quickly damaged when
                   exposed to hot exhaust gases.





                                                                                     LM-1_Manual_3.4.doc
   1   2   3   4   5   6