Page 6 - nitrous-8cyl-twin-nozzle-wet
P. 6

1.2 System Requirements

     When used correctly, these kits should work with stock internal engine components.  To ensure proper
     performance and engine life, the following is an absolute must:

     !  Manual Transmissions

        If the vehicle is to be exposed to severe operating conditions, such as drag strip usage, the standard
        clutch should be replaced with a high performance unit.

     !  Automatic Transmissions

        If the vehicle is to be exposed to severe operating conditions, such as drag strip usage, a reputable high-
        performance transmission shop should service the automatic transmission.


     1.3 Kit Components

     Before beginning the installation of your DynoTune nitrous kit, compare the components in your kit with
     those shown in Figure 1 and listed in Table 2.  If any components are missing, please contact DynoTune
     Technical Support at (978)562-6040.
                                  Table 2.  DynoTune Dual Nozzle Wet Kit Parts List
               Item                     Description                        Quantity               P/N
                 1     4AN Bottle Nut Adapter                                  1
                 2     Bottle Nut Teflon Washer                                1
                 3     #10 N20 Bottle                                          1
                 4     #10 Bottle Bracket Set                                  1
                 5     Wet Nozzle                                              2
                 6     Wet Nozzle Adapter                                      2
                 7     Wet Nozzle Adapter Nut                                  2
                 8     Nitrous Solenoid                                        1
                 9     1/8” NPT x 4 AN                                         1
                10     2 ft. 3AN Hose (Blue)                                   2
                11     Fuel  Solenoid                                          1
                12     1/8” NPT nipple                                         2
                13     2 ft. 3AN Hose (Red)                                    2
                14     Solenoid Mounting Bracket w/screws                      2
                15     Flare Jets                                              12
                16     16 ft. 4AN Hose (blue)                                  1
                17     Micro switch assembly                                   1
                18     Arming Switch                                           1
                19     Wiring Relay – 30 AMP                                   1
                20     Harness for Wiring Relay w/ Fuse                        1
                21     2 ft. 4AN Hose (Red)                                    1
                22     1/16” NPT x 4AN Fitting                                 1
                23     5/16”, 5/16” , 5/16” Hose Barb Fitting                  1
                24     5/16” Hose Clamp Fittings                               3
                25     1/16” NPT Pipe Tap                                      1
                26     5/16” hose barb to 1/8” NPT                             1
                27     3 feet rubber 5/16” fuel injection hose                 1
                28     1/8” NPT “T”                                            2


                                                                       6
   1   2   3   4   5   6   7   8   9   10   11